Zk-pp2k Manual [top] -

The also covers less-known but powerful features.

This device is a standalone biometric access control and time attendance terminal. It supports multiple verification methods including Fingerprint, Face (on select models), and RFID Card. It is designed to work in "Standalone Mode" (storing data locally) or "Network Mode" (sending data to a server via Pull/Push protocol).

Press the stock release button to fold it, or remove the pin to detach it completely.

Short-press the encoder knob to cycle through parameters until flashes. Turn the knob to set it to 5.000 . Zk-pp2k Manual

Remove the base plate, unscrew the fill valve, soak the O-ring in silicone oil, and re-tighten.

Approximately 2% accuracy across all ranges Duty Cycle Range: 0% to 100% (adjustable in 1% increments) Number of Pulses: 1 to 9999, or infinite (displays "----") Delay Output Time: 0.000 seconds to 9999 seconds Pulse Width: 0.000 seconds to 9999 seconds Signal Load Capacity: Less than 30mA output current

Increase or decrease the value of the currently selected parameter. 4. Basic Wiring Guide Power Input: Connect your power source (3.3V–30V) to the terminals. Load Connection: Connect your device (motor, valve, LED) to the terminals. Signal Warning: The also covers less-known but powerful features

Based directly on the ’s “Quick Start” chapter, follow these steps to power up and configure the terminal for first use.

Connect a DC power supply (3.3V–30V) to the input terminals. Do not use AC power .

operates in two main modes, which can be toggled by long-pressing the button for 5 seconds. 3.1 Normal Mode (F) Frequency Range: 1Hz - 150kHz. Duty Cycle Range: 0.00% - 100%. It is designed to work in "Standalone Mode"

Indicated when the "%" symbol is absent, this mode allows for discrete control. It is used to set specific positive and negative pulse widths, delay start times, and a set number of pulses for automated cycles. Practical Applications Common use cases for the ZK-PP2K include: Motor Control: Adjusting the speed of DC or stepper motors. Lighting: Dimming high-power LED arrays.

Note: The "PP2K" designation is often associated with the software SDK protocol (Pull/Push 2000) rather than a specific model number. This guide covers the standard ZK Teco device operation consistent with that protocol.

шим генератор импульсов zk-pp2k - Kulibin.su