Lp3 V23 Firmware Updated: R29 Mxq

If connected correctly, the Rockchip Tool will show a (indicating loader mode). Release the reset button. 3. Flash the New Firmware

If the software does not recognize your device, try a different USB port on your computer, use a shorter USB cable, or re-install the USB drivers.

Try a different USB cable, a different USB port, or make sure the reset button is pressed properly.

Load the .img file in the tool and begin the burning process.

Click . The "Restore" option is highly recommended because it wipes all corrupted system cache and formats the partitions before cleanly writing the new firmware.

A specialized USB cable with standard male connectors on both ends.

Flashing firmware is a technical process. If done incorrectly, you can permanently damage ("brick") your TV box. Follow instructions carefully. You are responsible for your own device. Before you begin, you will need: A PC/Laptop running Windows. A micro-USB to USB cable (USB Male to Male).

Firmware corruption causes a "boot loop" or freeze at the MXQ logo.