Software alone won't work without the physical link. You will need a with a "K1" connector (the standard two-pin plug used by Puxing, Baofeng, and Kenwood).
A download alone won't get the job done; you need a . The PX-777 uses a standard K-Plug (two-pin) connector, the same style used by Baofeng and Kenwood radios.
Before opening the software, connect your programming cable to the computer. Windows should automatically install the drivers. If the cable is not recognized, you may need to download the drivers from the cable manufacturer (usually Prolific or FTDI). Step 2: Install Software
The Ultimate Guide to Puxing PX-777 Programming Software Download and Setup puxing px-777 programming software download
If you encounter issues during the process, consult these proven troubleshooting fixes: Probable Cause Incorrect COM Port selection.
A long-standing distributor of radio accessories that hosts a dedicated software download section for Puxing, Baofeng, and TYT radios. Identifying the Right Software Version
Cheaper cables often use counterfeit Prolific chips. These chips fail to work with modern Windows 10 or Windows 11 updates, throwing a notorious "Error Code 10" in the Device Manager. If you use a Prolific cable, you will likely need to manually downgrade to a legacy driver version (v3.2.0.0 from 2008). 3. Step-by-Step Software Installation and Driver Setup Software alone won't work without the physical link
Downloading software for the Puxing PX-777 is a case study in digital obsolescence. It reveals how quickly manufacturers abandon support, leaving users to fend for themselves in a gray market of unverified files. While the radio itself remains a capable workhorse, the risks of acquiring its programming tool—from malware to bricked devices to legal gray areas—demand caution. The prudent operator will treat every download with forensic suspicion, prioritize open-source alternatives, and accept that sometimes the most responsible choice is to retire the hardware in favor of a modern, supported model. In the end, the PX-777’s software is not just a utility; it is a relic of an era when radios were built to last, but the bits that ran them were not.
Covers 400–470 MHz (or 350–390 MHz depending on the regional variant).
Check the "Settings" tab to manage menu items like VOX, keypad beep, and power-on messages. The PX-777 uses a standard K-Plug (two-pin) connector,
Download and install the executable (.exe) file for your chosen software (CHIRP or factory software). Step 3: Connect the Radio Turn your Puxing PX-777.
Always download exclusively from the official CHIRP project website ( danplanet.com ).
: Users who want a modern interface and the ability to copy/paste frequencies between different radio models. : Available at the official CHIRP website Puxing Official Software ("6-in-1") Description