I used to get many questions about unattended FTP scripts.
On this page I will show some examples of unattended FTP download (or upload, the difference in script commands is small) scripts.
FTP [-v] [-d] [-i] [-n] [-g] [-s:filename] [-a] [-w:windowsize] [host] |
||
| where: | ||
| -v | Suppresses display of remote server responses. | |
| -n | Suppresses auto-login upon initial connection. | |
| -i | Turns off interactive prompting during multiple file transfers. | |
| -d | Enables debugging. | |
| -g | Disables filename globbing (see GLOB command). | |
| -s:filename | Specifies a text file containing FTP commands; the commands will automatically run after FTP starts. | |
| -a | Use any local interface when binding data connection. | |
| -A | Login as anonymous (available since Windows 2000). | |
| -w:buffersize | Overrides the default transfer buffer size of 4096. | |
| host | Specifies the host name or IP address of the remote host to connect to. | |
| Notes: | (1) | mget and mput commands take y/n/q for yes/no/quit. |
| (2) | Use Control-C to abort commands. |
The -s switch is the most valuable switch for batch files that take care of unattended downloads and uploads:
FTP -s:ftpscript.txt
On some operating systems redirection may do the same:
FTP < ftpscript.txt
However, unlike the -s switch its proper functioning cannot be guaranteed.
The following table shows the FTP commands available in Windows NT 4. The difference with other operating systems is marginal.
The actual commands available can be found by starting an FTP session and then typing a question mark at the FTP> prompt.
To get a short description af a particular command, type a question mark followed by that command: (user input shown in bold italics):
| C:\>ftp ftp> ? get get receive file ftp> ? mget mget get multiple files ftp> bye C:\> |
| FTP commands | |
|---|---|
| Command | Description |
! |
escape to the shell |
? |
print local help information |
append |
append to a file |
ascii |
set ascii transfer type |
bell |
beep when command completed |
binary |
set binary transfer type |
bye |
terminate ftp session and exit |
cd |
change remote working directory |
close |
terminate ftp session |
debug |
toggle debugging mode |
delete |
delete remote file |
dir |
list contents of remote directory |
disconnect |
terminate ftp session |
get |
receive file |
glob |
toggle metacharacter expansion of local file names |
hash |
toggle printing `#' for each buffer transferred |
help |
print local help information |
lcd |
change local working directory |
literal |
send arbitrary ftp command |
ls |
nlist contents of remote directory |
mdelete |
delete multiple files |
mdir |
list contents of multiple remote directories |
mget |
get multiple files |
mkdir |
make directory on the remote machine |
mls |
nlist contents of multiple remote directories |
mput |
send multiple files |
open |
connect to remote tftp |
prompt |
force interactive prompting on multiple commands |
put |
send one file |
pwd |
print working directory on remote machine |
quit |
terminate ftp session and exit |
quote |
send arbitrary ftp command |
recv |
receive file |
remotehelp |
get help from remote server |
rename |
rename file |
rmdir |
remove directory on the remote machine |
send |
send one file |
status |
show current status |
trace |
toggle packet tracing |
type |
set file transfer type |
user |
send new user information |
verbose |
toggle verbose mode |
Suppose an interactive FTP session looks like this (user input shown in bold italics):
| C:\>ftp ftp.myhost.net Connected to ftp.myhost.net. 220 *** FTP SERVER IS READY *** User (ftp.myhost.net:(none)): MyUserId 331 Password required for MyUserId. Password: **** 230- Welcome to the FTP site 230- Available space: 8 MB 230 User MyUserId logged in. ftp> cd files/pictures 250 CWD command successful. "files/pictures" is current directory. ftp> binary 200 Type set to B. ftp> prompt n Interactive mode Off. ftp> mget *.* 200 Type set to B. 200 Port command successful. 150 Opening data connection for firstfile.jpg. 226 File sent ok 649 bytes received in 0.00 seconds (649000.00 Kbytes/sec) 200 Port command successful. 150 Opening data connection for secondfile.gif. 226 File sent ok 467 bytes received in 0.00 seconds (467000.00 Kbytes/sec) ftp> bye 221 Goodbye. C:\> |
An FTP script for unattended file transfer would then look like this:
USER MyUserId MyPassword cd files/pictures binary prompt n mget *.*
Note that I left out the BYE (or QUIT) command, it isn't necessary to specify this command in unattended FTP scripts (though it doesn't do any harm either).
As you can see, using a script like this is a potential security risk: the password is stored in the script in a readable form.
As Tom Lavedas once pointed out in the alt.msdos.batch newsgroup, it is safer to create the script "on the fly" and delete it afterwards:
@ECHO OFF :: Check if the password was given IF "%1"=="" GOTO Syntax :: Create the temporary script file > script.ftp ECHO USER MyUserId >>script.ftp ECHO %1 >>script.ftp ECHO cd files/pictures >>script.ftp ECHO binary >>script.ftp ECHO prompt n >>script.ftp ECHO mget *.* :: Use the temporary script for unattended FTP :: Note: depending on your OS version you may have to add a '-n' switch FTP -v -s:script.ftp ftp.myhost.net :: For the paranoid: overwrite the temporary file before deleting it TYPE NUL >script.ftp DEL script.ftp GOTO End :Syntax ECHO Usage: %0 password :End
Sometimes it may be necessary to make the script completely unattended, without the user having to know the password, or even the user ID, but with the possibility to check for errors during transfer.
There are several ways to do this.
One is to redirect FTP's output to a log file and either display it to the user or use FIND to search the log file for any error messages.
Another way to do this, on the fly, is by displaying FTP's output on screen, in the mean time using FIND /V to hide the output you do not want the user to see (like the password and maybe even the USER command):
FTP -s:script.ftp ftp.myhost.net | FIND /V "USER" | FIND /V "%1"
It is important not to use FTP's -v switch in either case.
To create a semi interactive FTP script, you may need to split it into several smaller parts, like an unattended FTP script to read a list of remote files, the output of which is redirected to a temporary file, which in turn is used by a batch file to create a new unattended FTP script on the fly to download and/or delete some of these files.
Create these files by writing down every command and all screen output in an interactive FTP session, analyze this "log" thoroughly, and test, test, and test again!
And don't forget to log the results by redirecting the script's output to a log file. You may need it later for debugging purposes...
Instead of Windows' own native FTP command, you can choose from a multitude of "third party" alternatives.
I'll discuss three of those alternatives here: a command-line tool, a GUI-tool and VBScript with a third party ActiveX component.
| Note: | GNU WGET handles HTTP downloads just as easily. |
WGET is a port of the UNIX wget command.
WGET is perfect for anonymous FTP or HTTP downloads (sorry, no uploads), but it can be used for downloads requiring authentication too.
GNU WGET comes with help both in the (text mode) console and in Windows Help format.
The basic syntax for an FTP download doesn't get any simpler than this:
WGET ftp://ftp.mydomain.com/path/file.ext
for anonymous downloads, or:
WGET ftp://user:password@ftp.mydomain.com/path/file.ext
when authentication is required.
| Note: | This is not secure, as you would need to store your user ID and password in unencrypted format in the batch file. Besides that, the user ID and password will be logged together with the rest of the URL on all servers associated with the file transfer. Read the GNU WGET help file for more information on securing user IDs and passwords. |
WinSCP is a free open-source SFTP and FTP client with a command line/scripting interface as well as a GUI.
WinSCP can be used for uploads and downloads.
ScriptFTP is a tool to, you may have guessed, automate FTP file transfers.
It supports plain FTP, FTPS and SFTP protocols.
Commands to e-mail and/or log results are available.
All commands can be run on the command line or from a script.
Scripts can be encrypted, or converted online to self-contained executables.
The shift from in the 2010s
Pure18 and Rikki Six are two entities that have joined forces to support individuals in their pursuit of growth and self-improvement. Pure18, a well-known brand, has established itself as a beacon of guidance for young adults navigating the challenges of transitioning into adulthood. Rikki Six, a prominent figure in the industry, has been instrumental in empowering individuals to take control of their lives and make informed decisions.
True to the Pure18 brand, the cinematography is bright and focuses on high-definition, intimate shots that emphasize a "pure" and realistic atmosphere. Why It’s a Fan Favorite
Today, the legacy of this specific release is visible primarily through digital metadata. Because physical media (DVDs) declined rapidly during this era, "New Beginnings" exists almost entirely as a digital artifact distributed via subscription platforms, secondary clip stores, and tube networks. It stands as a textbook example of the early digital-only distribution models that completely transformed adult entertainment commerce. Pure18 - Rikki Six -New Beginnings-
Born on December 18, 1990, in Riverside, California, Rikki Six had a diverse background before entering the adult entertainment industry.
: She was a competitive gymnast and cheerleader during her youth. Before her film career, she attended both nursing and dental assisting school, working briefly as a dental assistant.
Even years after its initial release, "New Beginnings" is often cited by fans of Rikki Six for its high production quality and the genuine chemistry showcased on screen. It captures Rikki at the height of her popularity within the Pure18 catalog. Want to learn more? The shift from in the 2010s Pure18 and
What sets "Pure18 - Rikki Six - New Beginnings -" apart is Rikki's physicality. Having been a gymnast and cheerleader, she possessed a flexibility and stamina that was markedly different from her peers. In her early scenes, which this keyword likely represents, she displayed a mix of shy smiles and sudden, athletic bursts of energy. This made her a favorite among fans who preferred "natural" performers over plastic surgery-heavy stars.
Launched as a premier site within the network (one of the largest adult entertainment conglomerates), Pure18.com built its reputation on presenting performers who were exactly 18 years old (or of legal age) and had a "girl-next-door" aesthetic. The branding explicitly targeted the "barely legal" genre, focusing on authenticity, minimal makeup, and a high-energy, amateur feel contrasted with professional production values.
Implementing higher production standards for visual and interactive materials. True to the Pure18 brand, the cinematography is
Pure18 is an adult content platform that focuses on providing a safe and respectful environment for performers and consumers alike. One of its notable features is the spotlight on various performers, offering them a platform to showcase their talents and connect with their audience. Rikki Six, a performer featured on Pure18, has been making waves with her content, especially with her recent feature titled "New Beginnings."
She typed a reply, then deleted it. Then typed again.
The phrase “New Beginnings” serves as a powerful thematic keyword, transcending any single production. It perfectly encapsulates several key moments in Rikki Six’s career and the industry at large.
Day six was the “reclamation session.” Each participant chose a single movement they once loved but had abandoned. Rikki chose the cartwheel—the first skill she ever learned, at age five, in a church basement with a foam mat and a teacher who called her “sunshine.”