Unlocking the Mitutoyo Surftest SV-400: A Comprehensive Guide Mitutoyo Surftest SV-400
Down to 0.0001µm (0.1 nanometers) in the Z1 (stylus) axis. Straightness Accuracy: 0.05µm / 28mm to 0.15µm / 100mm.
Press the start button. The drive unit will move the stylus across the surface. mitutoyo surftest sv400 user manual full
Features automated Ra and step calibration methods where only the reference specimen value needs to be entered.
A differential inductance transducer with an interchangeable diamond stylus tip (typically The drive unit will move the stylus across the surface
The SV-400 is typically used for high-accuracy surface roughness measurements and features: Measurement Parameters : Supports standard parameters including Calibration : Requires the 178-611 Reference Step Specimen
Review the measured value. If it falls outside the acceptable tolerance (typically If it falls outside the acceptable tolerance (typically
Carefully insert the detector into the drive unit's quick-connect chuck. Tighten the locking screw gently.
The total travel distance for analysis typically consists of 5 sampling lengths (
Clean the workpiece thoroughly using isopropyl alcohol to remove oil, dust, and cutting fluids.