Mikrotik L2tp Server Setup Full Portable -

/ip ipsec active-peers print /ip ipsec installed-sa print

/ip firewall filter add chain=input protocol=udp port=500,4500 action=accept comment="IPsec IKE/NAT-T" /ip firewall filter add chain=input protocol=ipsec-esp action=accept comment="IPsec ESP" /ip firewall filter add chain=input protocol=udp port=1701 action=accept comment="L2TP (if not using IPsec only)"

Optional: If you want to allow VPN users to access the internet through the router, ensure NAT is configured (usually covered by a default masquerade rule). Move these rules to the top of your filter list. Step 7: Testing the Connection On a remote device (e.g., Windows 10/11): Go to -> Add a VPN connection . VPN Provider : Windows (built-in). Connection Name : HomeVPN . Server name or address : Your router's Public IP. VPN Type : L2TP/IPsec with pre-shared key. Pre-shared key : MySuperSecretKey (Set in Step 4). mikrotik l2tp server setup full

Ensure Proxy ARP is enabled on your bridge interface, or set up NAT for the VPN subnet.

Local Address: 192.168.80.1 (This will be the gateway for the VPN clients). /ip ipsec active-peers print /ip ipsec installed-sa print

You are using (IPsec configurations differ slightly). Your MikroTik has a dynamic IP (I can help with DDNS).

/ip ipsec proposal set [find default] auth-algorithms=sha256 enc-algorithms=aes-256-cbc lifetime=8h pfs-group=modp2048 VPN Provider : Windows (built-in)

Next, create a DHCP-style server configuration for the VPN (this assigns IPs, DNS, and wins to clients):