Separate surface-mounted or flush-mounted sensor (included). 3. Installation and Wiring Diagram
Locating the manual and technical documents is straightforward.
The Multi 9 IC 2000 P functions by continuously measuring outdoor brightness via a remote photoelectric cell (sensor). When the ambient light drops below a user-defined threshold, the switch closes its output contact to turn on connected illumination (such as streetlights, security signs, or storefront displays). When dawn breaks and light rises above the threshold, the circuit opens. Key Technical Specifications 230V AC (+10% / -15%), 50/60 Hz Merlin Gerin Multi 9 Ic 2000 P Manual
The sensor must be installed facing north to avoid direct sunlight or car headlights. The sensor cable can be extended up to 100m (recommended wire cross-section: 2 × 0.5mm²). 4. Programming the IC 2000 P Manual
: Includes a 24-hour/7-day clock with up to 42 memory settings and a minimum 1-minute programming interval. Separate surface-mounted or flush-mounted sensor (included)
If you want, I can:
Delays switching to prevent rapid on/off cycling caused by temporary light changes (e.g., car headlights or passing clouds). Technical Specifications The Multi 9 IC 2000 P functions by
Includes a fixed or adjustable delay (approx. 80 seconds ) to prevent nuisance switching from lightning or car headlights.
Approximately 20–30 seconds (prevents flickering from car headlights or lightning) Switch-off Delay: Approximately 60–80 seconds
Summary
Connect the load circuit. Terminal 5 acts as the common feed, and Terminal 6 provides the switched phase output to your lighting contactor or directly to the light bulbs (if under 16A total load). Calibration and Programming