Transitioning from an Android Custom ROM to an OpenWrt ecosystem provides several benefits:
The sections below detail each approach.
如果希望将盒子当作主路由使用，可以用一个USB千兆网卡扩展第二个网口。有社区开发者测试过，盒子自带eth0为百兆网口，加上RTl8153或AX88179芯片的USB千兆网卡后可以作为WAN口使用。需要注意的是，USB网卡偶尔会出现速率从1Gbps降至1Mbps的情况，重启即可恢复。 huawei ec6108v9 openwrt new
Start with these basics:
Use network commands to push the OpenWrt kernel and rootfs directly to the eMMC flash. ⚙️ Initial OpenWrt Configuration Transitioning from an Android Custom ROM to an
Load the OpenWrt .ext4 rootfs asset into the ubuntu or rootfs system partition slot.
Install packages like AdGuard Home or Pi-hole / dnsmasq . The quad-core chip processes high volumes of domain filter rules without impacting network speeds. Install packages like AdGuard Home or Pi-hole / dnsmasq
is powered by a HiSilicon Hi3798M chipset, featuring a quad-core ARM Cortex-A7 architecture. While modest by modern gaming standards, this hardware is remarkably robust for networking tasks. It typically includes: : Integrated Ethernet and Wi-Fi capabilities.
A USB-to-TTL (UART) serial adapter (CH340G or PL2303 chip) for line-level terminal access.
该芯片采用四核ARM Cortex A7架构，主频最高可达1.5GHz，搭载Mali-450 GPU，配备1GB RAM和4GB或8GB ROM存储空间。以今天的标准来看，这套配置虽然谈不上强大，但作为轻量级软路由或NAS服务器绰绰有余——许多售价二三百元的路由器甚至还不如它的算力。接口方面，盒子通常提供百兆有线网口、两个USB 2.0接口、HDMI输出以及一个MicroSD卡插槽。