No. The Bluetooth connection on GP80160 models uses a standard serial port profile (SPP). After pairing the printer with your computer, it will appear as a virtual COM port, and you can configure the GP‑80 driver to use that COM port with the usual baud rate of 19200 bps.
If you are connecting a GP80160 NCUT series device to your computer—whether it’s a specialized printer, industrial label maker, or POS terminal—you need the correct driver to bridge the gap between the hardware and your operating system. Without it, your computer might detect a "Unknown Device" or fail to print altogether.
Open Printer Properties , click the Ports tab, and change the checkmark to the highest numbered USB virtual port available (e.g., changing from USB001 to USB002 ). Printer outputs unreadable gibberish or symbols gp80160 ncut series driver full
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
Open your Windows and navigate to Devices and Printers . If you are connecting a GP80160 NCUT series
The refers to the Gprinter GP-80160 series of 80mm thermal receipt printers . The "NCUT" designation typically distinguishes between models with an automatic cutter (Cut) and those without (No Cut). Driver & Support Overview
: In the installation interface, select 80mm Series or specifically GP-80160 . Configure Port : Printer outputs unreadable gibberish or symbols This public
Open your master application (such as specialized vector CAD suites or label design programs).
Turn off your printer and connect it to your computer using the target interface cable (USB is standard). 2. Executing the Installer