by Andrey Azimov
Proper wiring is crucial to prevent damage to the unit. The uses both high-voltage for loads and low-voltage for sensors and communication. 2.1 Power Supply and Relays Ensure the supply voltage matches the instrument rating.
: The manual covers SB655, SB655/C, and SB655/S models, which share similar digital output configurations. Digital Outputs (DOL)
The official instruction guide begins with critical safety warnings. The manual (available in multiple languages, including Russian) outlines several key points that must be strictly followed: eliwell sb655 c manual repack
: To access the full parameter settings menu (PA2), press the
: Always route incoming main power through a step-down transformer matching the device rating label. Do not tap directly into raw mains power. Proper wiring is crucial to prevent damage to the unit
: Supports NTC, 4-20 mA, 0-10 V, 0-1 V, and 0-5 V sensors.
The parameter layout on the Eliwell SB655/C relies on a folder structure divided across user, service, and manufacturer access levels. Accessing the Full Parameter Menu : The manual covers SB655, SB655/C, and SB655/S
| Parameter | Old Value (Cooler) | New Value (Freezer) | Navigation notes from repack | | :--- | :--- | :--- | :--- | | LS (Minimum SP) | -5°C | -30°C | Found after parameter US | | SP (Setpoint) | 3°C | -18°C | Directly accessible via SET key | | dIt (Defrost interval) | 8 hours | 4 hours | Parameter group dF | | dL (Max defrost duration) | 20 min | 35 min | For heavy ice buildup | | FSt (Fan stop temp) | 4°C | -5°C | Prevents icing of evaporator |
A pre-programmed key supplied by Eliwell to download parameters does not need to be formatted.
Контроллер SB 655/C/S Eliwell - Сибирский Холод