Dvb Select Type Error Samsung Tv File

Locate the , Cable In , or Satellite port on the back or side of the TV (or One Connect Box). Unplug the coaxial cable completely. Inspect the cable pin for bends or damage. Firmly screw or push the cable back into the correct port. 3. Reconfigure the Broadcast Settings

If you do not have any antenna or cable plugged in, you cannot complete a standard channel scan. However, Samsung's OS requires you to pass the DVB selection screen to reach apps. Here is the trick:

Before changing software settings, ensure your hardware isn't causing the signal block:

Inside, he saw a setting labeled . It was set to On . He also saw DTV Mode . It was set to DVB-T2 . dvb select type error samsung tv

: Ensure your TV is set to the TV source (not an HDMI or AV input) before attempting to change tuner settings.

If the problem persists after these steps, the issue may not be with the TV, but rather with the incoming signal.

Screw the cable back into the TV tightly, ensuring it is finger-tight and not cross-threaded. Locate the , Cable In , or Satellite

Does this error happen on or only when switching to Live TV? Share public link

Digital TVs rely on specific tuners to decode compressed digital signals. When a Samsung TV throws a DVB type error or gets stuck on an unskippable scanning prompt, it is generally caused by one of four factors:

When a Samsung TV displays a "DVB select type" error or prompt, it means the TV's internal tuner is confused about which digital broadcast standard to decode (such as DVB-T for terrestrial/antenna, DVB-C for cable, or DVB-S for satellite). This usually happens due to: Firmly screw or push the cable back into the correct port

⭐⭐☆☆☆ (Frustrating, but fixable) Applies to: Samsung Smart TVs (2016–2024 models, especially those with DVB-T2/C/S2 tuners)

The coaxial cable connecting your antenna or wall outlet to the TV has wiggled free.

It sounds like you're encountering a on your Samsung TV. This typically happens during or after a channel scan (especially if you moved, changed antennas, or reset the TV).

To clear the error, you must manually guide the TV to the correct signal type and run a fresh channel scan. Follow these step-by-step instructions: 1. Access the Broadcasting Menu Turn on your Samsung TV. Press the or Menu button on your remote control. Navigate to Settings (the gear icon). Scroll down and select Broadcasting . 2. Configure the Channel Settings