Download Driver B-scan Tenprint 1051: New!

Disconnect the B-Scan Tenprint 1051 USB cable from your computer before running the installer.

Designed for flexibility, the B-Scan Tenprint 1051 supports and Linux (Ubuntu/Fedora) distributions. Its ergonomic, compact build makes it a top choice for system integrators looking for a reliable, "plug-and-play" USB 2.0 solution for large-scale biometric projects.

If you see a yellow exclamation mark next to your B-Scan device, right-click it and choose . download driver b-scan tenprint 1051

: The device typically identifies as USB\VID_17B9&PID_0086 . Operating System Support : The B-Scan 1051

Run the installer (often named Setup.exe or Biomorf_Driver_Installer.exe ) as an Administrator. Disconnect the B-Scan Tenprint 1051 USB cable from

If you do not have the physical media, you must request the latest driver directly from the original equipment manufacturer (OEM) or your certified system integrator.

I will also mention that the device might be known as "Biomorf B Scan Tenprint 1051". If you see a yellow exclamation mark next

Connect the scanner to a high-power USB port (preferably a rear motherboard port if using a desktop PC). Section 3: Linux Deployment Workflow

How to Download and Install the B-Scan Tenprint 1051 Driver Finding the correct driver for professional biometric hardware can be challenging. The B-Scan Tenprint 1051 is a high-performance, FBI-certified live scan fingerprint scanner used widely for law enforcement, civil identification, and background checks. To maintain its high scanning resolution and seamless integration with identification software, you must install the correct, authorized device driver.

| | Likely Cause | Solution | |-----------|------------------|---------------| | “Driver not signed” (Windows 10/11) | Test mode or unsigned older driver | Enable Test Mode (bcdedit /set testsigning on) or use the latest signed driver from Biometrika. | | “Device descriptor request failed” | Faulty USB cable or power issue | Use the original thick USB cable; some units require external 5V power – check the power adapter. | | “Cannot start device (Code 10)” | Conflict with another biometric driver | Uninstall all other fingerprint software (e.g., DigitalPersona, SecuGen). | | “Scanner not capturing images” | Missing SDK runtime | Install the B-Scan SDK Runtime from the manufacturer’s site (separate download). |