Standard Pdf: Din 5464

For design engineers, quality managers, and machinists, accessing the official PDF document is crucial for accurate production.

The DIN 5464 standard is widely used in various industries, including:

Even with the PDF in hand, errors happen. Avoid these: din 5464 standard pdf

No. DIN 5464 deals with straight‑sided splines (shaft‑hub connections). The standard that is often confused with it is DIN 564 , which covers hexagon head set screws with half dog point. There is also a standard DIN 546 for retaining rings, which is unrelated.

(Note: If your application is food contact, medical, or hazardous materials, always cross-check with relevant hygiene or safety regulations.) (Note: If your application is food contact, medical,

The standard specifies the dimensions and tolerances for straight-sided splines within the heavy series . While the original 1965 version has been technically withdrawn, it remains a common reference in engineering for heavy-duty spline shaft connections. Key Technical Details

is a German industrial standard (Deutsches Institut für Normung) that specifies involute splines for internal and external gear teeth with a module of 0.6 to 10. More specifically, it covers side-fit splines where the centering is achieved by the flanks of the teeth. and high-frequency alternating torques.

: Unlike the more common light or medium series (such as DIN ISO 14), DIN 5464 specifies a profile with a higher number of teeth. This design allows for a much higher load capacity and ensures that torque is distributed more evenly across the connection.

The official edition is the current, up-to-date standard according to the Deutsches Institut für Normung (DIN). Some third-party vendors incorrectly mark it as "withdrawn" due to the 2010 edition being considered "historical" in their catalogs; always verify that you are using the 2010 edition (date: 2010-03-01).

Note: The official DIN 5464:2010-03 standard is often available in German or with English translations. Summary of Key Data Description Title Straight-sided splines - Heavy series Pressure Angle 0∘0 raised to the composed with power Key Property High load capacity/many teeth Centering Current Edition

: The high surface area contact makes it highly resistant to wear under shock loads, rapid reversals, and high-frequency alternating torques.