The ChipBLASTER JV10 is a benchmark in high-pressure coolant systems for CNC machining. High-pressure coolant delivery is no longer a luxury; it is a necessity for modern manufacturing. By delivering coolant directly to the cutting zone, the JV10 breaks through the vapor barrier created by extreme heat, extending tool life and enabling faster cycle times.
Pressure Adjustment: The coolant pressure can be adjusted using the pressure regulator valve, allowing you to tailor the pressure to the specific machining application.
1. Check the electrical cabinet for tripped overloads.2. Reset all emergency stop buttons on the machine and JV10. chipblaster jv10 manual
Wire the emergency stop (E-stop) loop and fault signals back to the CNC control to shut down the machine if the pump loses pressure. 3. Operating Instructions Priming the Pump
Position the JV10 on a flat, level surface as close to the machine tool's coolant tank as possible. The ChipBLASTER JV10 is a benchmark in high-pressure
Check motor amp draw; reset the thermal relay in the electrical box. Low coolant level Top off the CNC machine's main reservoir tank. 6. Safety Protocols and Operational Best Practices
Missing interlock signal from the CNC machine. Pressure Adjustment: The coolant pressure can be adjusted
The adjustable frequency drive (VFD) can hold a lethal charge for up to 10 minutes after power is removed. Fluid Safety: