Link — Cap 2000 Viscometer Manual

The manual includes critical appendices for long-term instrument health:

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

Upon startup, the CAP 2000+ will prompt for speed setting (RPM), with default settings often set at 750 (50Hz) or 900 (60Hz). II. Operating Procedures

Before diving into operational details, it is helpful to understand what makes the CAP 2000 a unique and valuable instrument. cap 2000 viscometer manual link

Place the viscometer on a clean, level bench surface.

The main screen shows viscosity in your chosen unit (Poise, cP, Pa·s, or mPa·s), percent torque, temperature, spindle number, and actual speed. If the torque is below 10 % of full scale, the display flashes (under‑range condition). If the torque exceeds 100 %, “EEEE” is displayed (over‑range).

The calibration procedure uses a viscosity standard fluid and guides you through a built‑in routine accessible from the menu. Can’t copy the link right now

is a laboratory-standard, variable-speed cone and plate viscometer designed for precise, moderate-to-high shear rate fluid analysis. Unlike its fixed-speed counterpart, the CAP 1000+, the

- Manual No. M02-313-I0916

The CAP 2000 Viscometer uses a cone-and-plate measuring system to determine the viscosity of the sample. The measurement procedure involves the following steps: never by the handle or head.

Regular calibration verification is essential for compliance with ISO and ASTM standards.

: Place the instrument on a level surface. Lift it only by the base or column , never by the handle or head.