Babi Italia - Parkland Convertible Crib Assembly Instructions Better

Use the provided screws and wing nuts or barrel nuts to secure the support brackets to the corner posts. 4. Attach the Front Rail (Footboard)

: Babi Italia was manufactured by LaJobi Industries. If your model uses an old "drop-side" rail design (where the front rail slides up and down on plastic tracks), do not use it . Drop-side cribs were banned by federal safety regulations due to entrapment hazards. Ensure your Parkland model is a fixed-gate, static design.

This step is crucial for safety and requires careful attention to orientation.

That’s where this guide comes in. This isn’t just a recap of the manual. It’s a complete, better, and more detailed walkthrough of the assembly process. We’ll cover everything from the moment you open the box to the final safety check, including expert tips, common pitfalls to avoid, and instructions for all the convertible stages. By the end, you’ll have a rock-solid, safe, and stylish crib that will serve your family for years. Use the provided screws and wing nuts or

The slot on the barrel nut should align with the bolt entering from the perpendicular side. If the bolt won't "catch," use a flathead screwdriver to rotate the barrel nut inside its hole.

: Screw the threaded feet into the bottom of the headboard and footboard legs.

[ Headboard (Back Panel) ] | | [Left End] [Right End] | | [ Stabilizer Bars / Mattress Spring ] | | [ Footboard (Front Panel) ] Step 1: Connect the Side Panels to the Headboard If your model uses an old "drop-side" rail

(sold separately). Lower the mattress to its lowest setting. Full-Size Bed

use power drills or drivers, as these can easily strip the wood or over-tighten the bolts, compromising the crib’s integrity. Check Hardware:

is assembled, perform these safety checks before putting your baby inside: This step is crucial for safety and requires

: Every few months, check the bolts to ensure they haven't loosened from normal everyday use.

Do you have the , or are you using replacement bolts ?