Audi A3 8v Coding List [exclusive]

Tagfahrlicht-Dauerfahrlicht aktiviert zusaetzlich Standlicht →right arrow Set value to 3. Disable DRL Wink

➡️ Coding ➡️ Byte 1 ➡️ Enable Bit 3 (Lap Timer active) 3. Low Fuel Warning Toggle

: Zugangskontrolle → Komfortbedienung fahrzeugtueren oeffnen / Schliessen → Change to "Active" Deactivate Start/Stop System audi a3 8v coding list

Keeps High Beam Assist turned on even after you cycle the ignition. 09 (Central Electrics) Function: Adaptation Channel: Fernlichtassistent-Fernlichtassistent Status Value: Change from Reset to Hold or Memory 3. Scandinavian Daytime Running Lights (DRLs)

➡️ Coding ➡️ Byte 4 ➡️ Enable Bit 2 and Bit 3 Puddle Lights Always On: Have a code that we missed

: Adds a "beep" from the alarm horn when locking or unlocking the vehicle. Dashboard and Visual Tweaks

Change the number of flashes for a "lane change" tap from 3 to 4 or 5. Puddle Lights Always On: Hardware Needed for Coding

Have a code that we missed? Drop it in the comments below!

Always backup your control modules before changing any code. A single wrong digit can cause dashboard errors. 1. Dashboard and Instrument Cluster Mods

Allows holding the unlock button to lower all windows. Module: 09-Central Electrics 2. Driver Convenience & Interior These mods make daily driving slightly more convenient.

: Displays the estimated amount of fuel (in litres) required to fill the tank in the dashboard display. Hardware Needed for Coding