Aodelan Wtr2 User Manual - //top\\

Use the and DOWN arrows to choose a channel (1 to 99). Press SET to confirm.

Programs a countdown delay before the camera takes its first shot. (Range: 1 second to 99 hours, 59 minutes, 59 seconds).

2 × AAA batteries are required for the transmitter and another 2 × AAA batteries for the receiver – these are not included and must be purchased separately. aodelan wtr2 user manual

If you prefer a wired setup, connect the transmitter directly to your camera’s remote terminal using the supplied cable. The transmitter then acts as a wired shutter timer without needing the receiver.

Press the on the transmitter. This will halt the sequence immediately. If that doesn’t work (depending on the mode), you can also press and hold the Shutter button or simply turn off the transmitter. Use the and DOWN arrows to choose a channel (1 to 99)

Like all electronics, the battery life of the WTR2 may reduce in freezing temperatures. Keep the transmitter in an inside pocket when not in use. 6. Troubleshooting

(e.g., recommended settings for star trails vs. time-lapse photography). Final Verdict The Aodelan WTR-2 manual is a (Range: 1 second to 99 hours, 59 minutes, 59 seconds)

The exposure time is controlled manually by the photographer—there is no internal timer in this basic Bulb mode. For precise timed long exposures, use the instead (see Section 6).

The you want to achieve (timelapse, astrophotography, macro?)

Interior or real estate photography where both bright windows and dark corners need to be properly exposed in a single HDR composite.

| Parameter | Value | |-----------|-------| | Model Name | Aodelan WTR2 | | Frequency | 433.05 – 434.79 MHz | | Modulation | ASK / OOK | | Output Power | <10 mW (EIRP) | | Operating Distance | Up to 100m (open field) | | Transmitter Voltage | 2.4 – 3.2V DC (2x AAA) | | Receiver Voltage | 12V DC ±10% or 24V DC ±10% | | Standby Current | <5 mA (receiver) | | Relay Contact Rating | 5A @ 30V DC / 250V AC (resistive) | | Working Temperature | -20°C to +70°C | | Certification | CE, FCC (varies by batch) |